DIGITAL DOWNLOAD
An experimental 3D-printable rigging screw for IOM shrouds, intended as a low-budget, temporary alternative to a conventional metal fitting. This product has not been tested under real-world operating conditions.
VERSIONS & FILES
-
Choose Standard, Anti-rotation or M3x30. Each version is sold separately.
-
Your ZIP contains only the selected version's matching upper and lower STL files.
-
The Anti-rotation version uses the anti-rotation upper with the standard lower. Other versions are sold separately.
PRINTING & ASSEMBLY
-
Recommended material: PPA-CF. Print each part with its attachment eye facing upward.
-
Pause printing to insert the matching metal bolts and nuts. Set the insertion layers in your slicer for your chosen version and layer height.
-
Keep inserted hardware clear of the nozzle before resuming the print.
ADDITIONAL HARDWARE
-
Matching metal bolts and nuts
-
Shroud wire or suitable rigging connections
-
Suitable deck attachment hardware
-
Check fastener dimensions against the selected STL pockets. M3x30 identifies that version only.
BEFORE USE
-
Check fit, adjustment and retention before installation. Inspect printed parts for damage or deformation.
-
This experimental design has no validated working-load or reliability rating and is not equivalent to a proven stainless-steel fitting.
PLEASE NOTE
Digital files only. Printed components, filament, tools, metal hardware, rigging wire and boat are not included.
